|
|
|
|
Insights On
Alum-A-Lift
|
|
|
|
|
|
 |
 |
 |
|
|
|
|
|
Alum-A-Lift is a manufacturer of custom,
ergonomic lifting devices (battery powered
and motor driven) for loads up to 2000
pounds and 10 feet high. Alum-A-Lift also
specializes in portable & transportable
lifts. All lifts are configured to a
customer’s application to solve ergonomic
lifting problems and assist in preventing
back injury. Alum-A-Lift replaces those
heavy, outdated lifts with light-weight,
maneuverable aluminum ones that are
compliant to NIOSH & OSHA requirements.
Alum-A-Lift has been tested & certified for
use in class 100 clean rooms. A wide range
of custom end effectors is also available. |
|
|
|
|
|
Unlike single mast designs, Alum-A-Lift
constructions can withstand considerable
off-center loads. Stabilizers allow such
loads and precision alignment. When heavy
loads are specified, affected construction
elements are subjected to stress, strain and
deflection analyses (F.E.A.). Footprints are
calculated to assure compliance with
stability criteria |
|
|
|
|
Most models come with built-in, variable
limit switches to define upper and lower
elevations. If the load is sensitive or
expensive, redundant systems are used. In
contrast to some lift makes, 12 volts are
applied to motors rated at 12 volts and 24
volts to 24 volt motors. Batteries are
readily accessed and are easily replaced
when required. Warranties are not void when
the battery compartment is opened. Spare
parts are always in stock, reasonably priced
and shipped within 24 hours of receipt of
order. Major credit cards are accepted. |
|
|
|
|
|
End effecters are designed by our permanent
engineering staff; constructed and tested
in-house from a single source that is
responsible for the entire product. There is
no need for third party out-sourcing,
divided responsibility and the resulting
complications. End effecters may be
specified for manual or powered operation.
Ergonomic and anthropomorphic tables are
employed to help make such determinations. |
|
|
|
|
|
Our clients are welcome to observe and to participate in
product testing. In special situations third
party professionals are engaged as required.
Local support is available throughout the
industrial world by factory trained
representatives. |
|
|
|
|
|
 |
 |
 |
|
|
|
|
WORLDWIDE REPRESENTATION,
COMPLIES WITH ALL APPLICABLE
STANDARDS
|
|
|
Platform Lifts, Lift Tables, Bulk Material Lifts, Custom
Lifts, Ergonomic Lifts, Material Handling Lifts, Paper
Lifts, Roll Handling Lifts,
Scissor Lifts, Clean room Lifts, Military Lifts,
Pharmaceutical Lifts, Semiconductor Lifts, Electronics
Lifts, Test Equipment Lifts, Packaging Lifts,
Telecommunications Lifts, Wire/Cable Lifts, Bank Lifts,
Portable Lifts, Counterbalance Lifts, Vessel Lifts, Missile
Lifts, Vacuum Lifts, Industrial Lifts,
Vehicle Lifts, Lift Tables, Mobile Lifts, Vertical Lifts,
Industrial Lifting equipment, Vacuum Lifting Equipment,
Pallet Lifts, Drum Lifts, Drum Dumpers,
Carboy Lifts, Laser Lens Lifts, Monitors, Servers, Carton
Lifts, Tote Lifts, Tote Dumpers, Card Cages, Rack Mounted,
Vessels, Water Filters, Windshield Lifts,
Bag Dumpers, Wire Spools, Avionics, Jet Engine Components,
Gas Cylinder Lifts, Lifting Devices, Battery Powered Lifts,
Class 100 Cleanroom Lifts |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
|
|
|
|
 |
|
|
|
|
June 9-11, 2009 |
|
|
|
|
 |
|
October 5-7, 2009 |
|
|
 |
|
October 28-31, 2009 |
|
|
|
|
